Event Planning Articles

Event Planning Events
Conference Event Planning
Event Management Company
Event Planning Guide
Planning Events St Symposium
Event Planning Austin
National Event Management
Event Planning
Nonprofit Fundraising

meeting and event planning
Hopefully, you will have a record of how many people actually ate at the meal functions last year to help you make an educated guess. Lets take a look at these. As a final thought, one of the most overlooked ways to increase event registration is by delivering great events and by providing information or tools that will be of significant value for the attendees. The following are a few tips to help you avoid the common 10 pitfalls of the planning phase.


event management industry
One of the best ways to find great speakers and entertainers is by networking with fellow meeting planners. For example; have each committee member make copies of and give over receipts to you personally so that you can keep an accurate record of all things that are going on. Because of your DJs experience at similar, previous events, meetings, music research, and other training, your event will most likely occur as you have already imagined it to be. Budgeting Your Food Requirements Food and beverage functions are a major part of the conference program and are usually the most expensive budget item.

Event Planning Info

Event Management Industry Resource

Microphone tips

Different types of microphones have different acoustic profiles. Our technical officers can advise you about the type of microphones you will be using. Please read on to find out how to make proper use of different microphones and how to use them properly.

Handheld or stand-mounted microphones:
Handheld or stand-mounted mics should be positioned about 6-12 inches from the speakers mouth, and pointing up at about a 45-degree angle. With some types of microphones, holding the mic very close (3-6 inches) will cause additional emphasis of the lower frequencies, resulting in a "warmer," bass-heavy sound.

Clip-on microphones
For best results with clip-on mics they should be clipped to the tie or lapel at the breast pocket level. Try to avoid placing the mic behind the tie or under any fabric.

This eventually reduces the pickup of high frequencies, which results in a flat, "muddy" sound. Noise from the movement of clothing against the mic or its cable can be severe. Women can get good audio quality from clip-on mics attached to a stickpin or a small chain.




Surface-mounted microphones
Surface-mounted mics work best when they are positioned on a smooth, flat surface, such as a table or desk.

If table vibration is a problem, try placing a thin and soft rubber foam layer such as some mouse pads underneath the mic.

In some situations, surface-mounted mics can work well when they are mounted on a wall. Keep in mind that the sound quality of this type of microphone is affected by the size of the surface it is placed on.

For the best possible results, you should use a surface at least 3 feet square; using a smaller surface tends to reduce pickup of low frequencies.

Shotgun microphones
Shotgun mics can be positioned slightly above, below or to the side of the sound source, so that the mic does not appear in the camera frame.

Try to avoid moving the mic rapidly, since shotguns are sensitive to wind noise. Use a foam windscreen if possible.

Larger "zeppelin" or "blimp" windscreens are usually necessary if you are outdoors. It is a good idea to use a rubber-isolated shock mounts to minimize any and all handling noise.