Event Planning Articles

Day Change Rooms
Hotel Event Planning
Global Event Management
Security Information And Event Management
Full Service Event Management
Event Planning Website
Event Planning
Nonprofit Fundraising

event planning atlanta
Preparing ahead of time is of major importance, as an establishment cannot always accommodate special requests at a moments notice. This section is so that you will discover the secrets to conducting a terrific video conference. The conference budget may cover the complimentary conference registration for the chair; however, lodging can only be covered if there are complimentary rooms offered by the hotel, and travel reimbursement is not allowed.


free event planning
Consider a separate pitch for each major marketing segment. It is very important that the parameters for donations be explained in writing. Build attendance at your meeting or seminar with all the proven techniques that seminar promoters have used for years. The amount of time needed to consider and reach consensus on each idea. Below is a suggested list of areas of responsibility to which you can assign committee members. Sometimes the choices are such as a smorgasbord versus a steak.

Event Planning Info

Free Event Planning Resource

Microphone tips

Different types of microphones have different acoustic profiles. Our technical officers can advise you about the type of microphones you will be using. Please read on to find out how to make proper use of different microphones and how to use them properly.

Handheld or stand-mounted microphones:
Handheld or stand-mounted mics should be positioned about 6-12 inches from the speakers mouth, and pointing up at about a 45-degree angle. With some types of microphones, holding the mic very close (3-6 inches) will cause additional emphasis of the lower frequencies, resulting in a "warmer," bass-heavy sound.

Clip-on microphones
For best results with clip-on mics they should be clipped to the tie or lapel at the breast pocket level. Try to avoid placing the mic behind the tie or under any fabric.

This eventually reduces the pickup of high frequencies, which results in a flat, "muddy" sound. Noise from the movement of clothing against the mic or its cable can be severe. Women can get good audio quality from clip-on mics attached to a stickpin or a small chain.




Surface-mounted microphones
Surface-mounted mics work best when they are positioned on a smooth, flat surface, such as a table or desk.

If table vibration is a problem, try placing a thin and soft rubber foam layer such as some mouse pads underneath the mic.

In some situations, surface-mounted mics can work well when they are mounted on a wall. Keep in mind that the sound quality of this type of microphone is affected by the size of the surface it is placed on.

For the best possible results, you should use a surface at least 3 feet square; using a smaller surface tends to reduce pickup of low frequencies.

Shotgun microphones
Shotgun mics can be positioned slightly above, below or to the side of the sound source, so that the mic does not appear in the camera frame.

Try to avoid moving the mic rapidly, since shotguns are sensitive to wind noise. Use a foam windscreen if possible.

Larger "zeppelin" or "blimp" windscreens are usually necessary if you are outdoors. It is a good idea to use a rubber-isolated shock mounts to minimize any and all handling noise.